石油与天然气Oil & Gas


在严酷环境中提供最大可靠性的坚固型解决方案。Rugged Solutions for Maximum Reliability in Harsh Environments。

 

冲洗管Wash Pipes 旋转冲洗管 Washpipe Swivel

石油和天然气行业的严酷和严格监管的环境要求可靠,安全和高效的机械。具有匹配电子滑环的Deublin旋转活接接头可承受石油和天然气运营的冲击和振动,日复一日地提供可靠的性能。 The harsh and highly regulated environments of the oil and gas industry demand reliable, safe and efficient machinery. Deublin rotating unions with matching electrical slip rings withstand the shock and vibration of oil and gas operations to deliver reliable performance, day after day.

 

石油钻机在5,000 psi甚至更高的压力下将“钻探泥浆”(一种由沙子,粘土和其他材料制成的磨料混合物)泵入旋转的钻柱中。 杜宾的突破性解决方案经现场验证,使用寿命比传统填料转环长20倍,同时产生的热量更少,扭矩更小。 当密封件最终磨损时,可以在15分钟内更换顶部驱动器,从而进一步提高了钻机的生产率。 该专利设计提供3“和4”的内径。 Oil drilling rigs pump “drilling mud” – an abrasive mixture of sand, clay, and other materials – into the rotating drill string at pressures of 5,000 psi or even higher. Deublin’s groundbreaking solution has been field-proven to last 20 times longer than conventional packing swivels, while producing less heat and less torque. When the seal finally become worn, they can be swapped on the top drive in 15 minutes, further increasing rig productivity. This patented design is available in 3" and 4" bore diameters.

 

 

连续油管车
Coiled Tubing Units

Deublin将根据您的要求自定义渠道的大小和数量。Deublin will customize the size and number of channels to your requirements.

冲洗管密封
Wash Pipe Seals

Deublin的专利“硬密封”设计经实践证明,其使用寿命是传统包装样式的20倍,同时产生的热量更少,扭矩更小。提供3“或4”孔径。Deublin's patented "hard seal" design is field-proven to last 20 times longer than conventional packing styles, while producing less heat and less torque. Available in 3" or 4" bore diameter.

 

Service Kits服务包 20609-100


使用Deublin维修套件,只需花费十分钟即可更换磨损的冲洗管密封件。Replacing worn wash pipe seals takes as little as ten minutes with a Deublin service kit.

 

 

压裂离合器Fracking Clutches

Deublin气动和液压旋转接头在页岩油和天然气工业中广泛用于离合器和润滑。Deublin pneumatic and hydraulic rotary unions are widely used throughout the shale oil and natural gas industries for clutches and lubrication.

 

1102-070-029
1/4“单通道旋转接头

紧凑型单流旋转活接头,适用于所有气动和液压动力应用。

1300-082-023
3/8“单通道旋转接头

单流旋转活接头的流量是1/4“气动和液压活接头的两倍以上。

1205-000-003
1/2“单通道旋转接头

Monoflow旋转活接头用于世界标准的气动和液压工业离合器。

250系列
3/4“一通道旋转接头

单流旋转活接头的流量是1/4“气动和液压活接头的九倍。

355-021-019
1“单通道旋转接头

这些旋转的接头能够达到3,000 rpm的速度和高达1,000 psi(70 bar)的液压,可以与最大的泵和绞车配合使用。

2620-000-252
1/4“两通道旋转接头

无论何时需要双向液压动力,Deublin两通道活接头都可以工作。

1590-000
1/2“两通道旋转接头

Deublin高流量两通道活接头看到了船用绞车和可变螺距推进器的重型服务,仅举几个例子。

7100-068
串联多通道旋转接头

串联接头消除了异种介质(例如液压油和空气或水)之间发生交叉污染的任何风险。

 

Oil and Gas Industry | Deublin Company
Oil & Gas Industry Rotary Unions & Joints-Deublin
Hose Reel Solutions - Rotary Unions & Joints - Deublin
Coiled Tubing Solutions - Rotary Unions & Joints - Deublin
Subsea Flowline & Jumper Solutions - Subsea Swivels - Deublin

Offshore Oil & Gas Solutions - Rotary Unions & Joints - Deublin

Oil & Gas Solutions Onshore
Offshore Oil & Gas Solutions
Subsea Flowline & Jumper Solutions
Onshore Oil & Gas Solutions - Rotary Unions & Joints - Deublin
Offshore Oil & Gas Solutions - Rotary Unions & Joints - Deublin

Wash Pipes
The harsh and highly regulated environments of the oil and gas industry demand reliable, safe and efficient machinery. Deublin rotating unions with matching electrical slip rings withstand the shock and vibration of oil and gas operations to deliver reliable performance, day after day.
20609-100
Wash Pipe Seals
20609-100 lower nut
Service Kits
Bore Mounted Rotary Union
Coiled Tubing Units
Deublin will customize the size and number of channels to your requirements.

Fracking Clutches
Deublin pneumatic and hydraulic rotary unions are widely used throughout the shale oil and natural gas industries for clutches and lubrication.
1102-070-029
1/4" One-Channel
1300-082-023
3/8" One-Channel
1205-000-003
1/2" One-Channel
250 series
3/4" One-Channel
355-021-019
1" One-Channel
2620-000-252
1/4" Two-Channel
1590-000
1/2" Two-Channel
7100-068
Tandem Multi-Channel
20609-100
冲洗管密封
20609-100下螺母
服务包
内孔旋转接头
连续油管
压裂离合器
Deublin气动和液压旋转接头在页岩油和天然气工业中广泛用于离合器和润滑。
1102-070-029
1/4“单通道
1300-082-023
3/8“单通道
1205-000-003
1/2“单通道
250系列
3/4“一通道
355-021-019
1“单通道
2620-000-252
1/4“两通道
1590-000
1/2“两通道
7100-068
串联多频道

 

 
 

Deublin Rotary Unions & Swivel Joints & Slip Rings
Authorized China Distributor


信德迈科技(北京)有限公司 CNMEC Technology

地址:北京朝阳区望京街10号望京SOHO-T1-C座2115
邮编:100102
电话:010 - 8428 2935,8428 9077 ,8428 3983
手机:13910122694
网站:Http://www.cnmec.net

VIEW ONLINE CATALOG >>
REQUEST A CUSTOM PANEL QUOTE >>




QQ: 209136943
Email: sales@cnmec.biz
传真:010-8428 8762
美国DMK Engineering Solutions公司


京ICP备08000876号-2
京公网安备11010502019743